Textile reinforced conveyor belts general purpose -Arte Rubber

Textile reinforced conveyor belts (general purpose)

Textile reiforced conveyor belts convey loose and bulk materials under typical working conditions. The carcass of the textile reinforced conveyor belts , consists of polyester/polyamide (EP) fabrics, polyester/polyester (EE), polyamide/polyamide (PP) and aramid fabrics. They are suitable for a wide range of industrial process.

Textile reinforced conveyor belts are widely employed in quarrying, construction industry, steel manufactures, chemical industry, cement factories, in the range of temperature (-30…+70°C).

The rubber covers – are manufactured according to DIN 22 102 (X, W, Y, Z grades) or to the request of the customer.

Belt type			Tensile strength, min., (daN/cm2)	Elongation at break, min., (%)	Abrasion loss, max., (mm³)	Use
Group	Type	Standard	Tensile strength, min., (daN/cm2)	Elongation at break, min., (%)	Abrasion loss, max., (mm³)	Use
1.	X	DIN 22102/1-91	250	450	120	These grades of the rubber covers have characteristics to provide both a very high abrasion resistance and cut-and-gouge resistance as well as weather resistance. They are employed for heavy impact, large sized lumps and sharp materials.
2.	Y	DIN 22102 /1-91	200	400	150	The grades of the rubber covers are widely used for general conveyor belts and have superior resistance to abrasion, weather, cutting; they are suitable for handling crushed rocks, limestone, coal and slag.
3.	Z	DIN 22102/1-91	150	350	250	The grades of the rubber covers are widely used for general conveyor belts, standard quality.
4.	W	DIN 22102/1-91	180	400	90	These grades of the rubber cover have a very high abrasion resistance (less than 90-mm³-abrasion loss), assuring at the same time the belt’s long lifetime. It is recommended for transporting abrasive materials as well as glass, granite and other abrasive substances.